File Request HP 450 G3 machine is not in committed state

webspinner

Registered

reputation_scoree

MotherBoard Model
827025-001
Laptop Model
450 G3
Hello,

I replaced a motherboard in a HP 450 G3 laptop but it when it boots up I get the following error

WARNING!! Machine is not in committed state!
System is booting in Manufacturing Program Mode.....

Is anyone able to help or provide advise?

Mike
 

webspinner

Registered

reputation_scoree

I did try that but I receive the following error:
VPro configuration not supported (read)Bad variable specification
Bad variable specification
Errorlevel =
Bad variable specification
Syntax error
exit with errors!
end of execution

Maybe I dont have the correct AMTBrand tool? I used Rufus to create a FreeDOS bootable USB
 

webspinner

Registered

reputation_scoree

Which level? would bronze be enough?
Yes I am a repairman but never edit the bios file, simply use the file provided by manufacture.
 

webspinner

Registered

reputation_scoree

Here is the bios file, I used the HP BIOS tool to generate this backup file. Will it be sufficient?
 

Attachments

  • N78_0151.bin
    9 MB · Views: 0

webspinner

Registered

reputation_scoree

I don't think I am able to get the original file, as in from HP? so are you meaning download the file directly from the bios chip?
 

webspinner

Registered

reputation_scoree

incorrect how so?
I used a CH341a programmer and AsProgrammer to pull the bios file from the chip. Was it something I did wrong or is the BIOS incorrect?
 

webspinner

Registered

reputation_scoree

That is interesting, when I try and use CH341A programmer I get the following info
manufacture: other
memory name: unknown
memory size: unknown
I tried both the old motherboard and the new one with the same result

When I tried AsProgrammer it took several tries before it detected the BIOS chip and then it finally did and that is when I saved the file, this file is what I sent.

I have tried again and attached a new file plus a screen capture of what it shows in the program.
 

Attachments

  • HP 450 G3.bin
    16 MB · Views: 2
  • Capture.JPG
    Capture.JPG
    137.1 KB · Views: 3

Vahab Hemmati

Support Team
Staff member
Admin
Registered

Reputation:

That is interesting, when I try and use CH341A programmer I get the following info
manufacture: other
memory name: unknown
memory size: unknown
I tried both the old motherboard and the new one with the same result

When I tried AsProgrammer it took several tries before it detected the BIOS chip and then it finally did and that is when I saved the file, this file is what I sent.

I have tried again and attached a new file plus a screen capture of what it shows in the program.
 

Attachments

  • 450 G3 New.zip
    5.7 MB · Views: 1

webspinner

Registered

reputation_scoree

I tried the file Vahab Hemmati sent to me Wednesday of last week, that was the last one I have received so far
 

webspinner

Registered

reputation_scoree

I flashed it but now it doesn't post, caps lock flashes every 4-5 seconds for a bit then stops, after which the fan spins up. Black screen, wifi, power light, hard drive light and mute are on solid
 
Who is viewing this thread?

There are currently 0 members watching this topic

Users who has read this topic
Top